Windows-Server-2003

如何在 HP Proliant BL460c 刀片伺服器上查看 HP Smart Array 韌體版本

  • July 27, 2017

查看 HP Smart Array 韌體版本(最好是 GUI 版本)的最快方法是什麼?我應該在 Windows 中查找它還是可以通過 iLO 查看它?

如果您安裝了 HP Management Agents,則該hpacucli實用程序(陣列配置軟體的一部分)將提供您需要的所有控制器資訊。對於 Windows 2003,下載此軟體包以用於命令行工具 此軟體包用於GUI

ctrl all show config detail指令將輸出如下內容:

=> ctrl all 顯示配置詳細資訊

Smart Array P410i in Slot 0 (Embedded)
  Bus Interface: PCI           
  Slot: 0                      
  Serial Number: 50123456789ABCDE
  Cache Serial Number: PBCDF0BRHYI032
  RAID 6 (ADG) Status: Disabled
  Controller Status: OK        
  Chassis Slot:                
  Hardware Revision: Rev C     
  Firmware Version: 5.12       
  Rebuild Priority: High       
  Expand Priority: High        
  Surface Scan Delay: 15 secs  
  Queue Depth: Automatic       
  Monitor and Performance Delay: 60 min
  Elevator Sort: Enabled       
  Degraded Performance Optimization: Disabled
  Inconsistency Repair Policy: Disabled
  Wait for Cache Room: Disabled
  Surface Analysis Inconsistency Notification: Disabled
  Post Prompt Timeout: 0 secs
  Cache Board Present: True
  Cache Status: OK
  Accelerator Ratio: 25% Read / 75% Write
  Drive Write Cache: Enabled
  Total Cache Size: 1024 MB
  No-Battery Write Cache: Enabled
  Cache Backup Power Source: Capacitors
  Battery/Capacitor Count: 1
  Battery/Capacitor Status: OK
  SATA NCQ Supported: True

  Array: A
     Interface Type: SAS
     Unused Space: 0 MB
     Status: OK

引用自:https://serverfault.com/questions/448684