Networking

DD-WRT + TekRADIUS:讓它工作有問題

  • August 1, 2011

有沒有其他人讓它工作?

我的設置:

Router: Netgear WNR3500v2
  WAN IP: y.y.y.y
  Radius: off
  Wireless Security:
     Security Mode: WPA2 Enterprise
     WPA Algorithms: AES
     Radius Auth Server Address: x.x.x.x
     Radius Auth Server Port: 1812
     Radius Auth Shared Secret: password
     Key Renewal Interval (in seconds): 3600

TekRadius Server:
  Users:
     test (username), User-Password (check): 1234, TLS-Server-Certificate (check) [created with TekCERT]
  Clients:
     Default (NAS), password (secret)
     y.y.y.y (NAS), password (secret)
  Settings:
     Service Parameters:
        Listen IP Address: x.x.x.x
        Authentication Port: 1812
        PEAP Inner Auth Method: EAP-MS-CHAP-v2

Computer Trying to Authenticate: Mac: 10.6.5
  Recognizes that the auth needs user/pass. 
  I type in test and 1234, nothing happens, it asks again.  
  Sometimes it "connects" says its authenticating, 
      and then disconnects, and then repeats.

硬體設置:Windows 7 上的 TekRADIUS,直接插入路由器。Mac,嘗試通過 netgear 和 radius 伺服器進行無線身份驗證。

注意:我在嘗試連接時一直在執行wireshark,並應用了“半徑”過濾器,但沒有出現任何數據包。

在 TekRADIUS 日誌中,除了伺服器啟動和停止時,它什麼都不顯示,並且這些消息:

12/7/2010 5:06:34 AM - IP address configuration change has been detected

這很奇怪,因為IP沒有改變。

對帶有 WPA2 和 RADIUS 的 DD-WRT 的支持被破壞。dd-wrt ​​上的 nas 程序在第一個答案後停止工作。做一個搜尋,有幾個人(包括我)在他們的硬體上也有這個。

引用自:https://serverfault.com/questions/209887