找不到 PHP5-FPM /var/run/php5-fpm/ 目錄
今天我重新啟動了我的伺服器,PHP5-FPM由於
/var/run/php5-fpm/
找不到而啟動失敗。
/var/run/
重新啟動時清除,大多數服務在重新啟動時重新創建其目錄/var/run/
,如本SF question所示。我一直認為 PHP5-FPM 在重新啟動時會自動創建*/var/run/php5-fpm/*並且之前的重新啟動沒有問題。PHP5-FPM 是否停止在更新中創建目錄,或者它從未創建過目錄?我今天之前的最後一次重新啟動是在 30 多天前,我不需要為此或任何以前的重新啟動手動創建*/var/run/php5-fpm/*目錄。
我是否需要將 mkdir 添加到我的 php5-fpm 的init.d文件中,還是有其他推薦的方法?另外,為什麼這個“找不到目錄”錯誤以前沒有發生過?
其他資訊:
該伺服器正在執行 Debian 7 (Wheezy)、Nginx 和 MySQL。
/var/run
連結到/run/
。/run/
擁有 755 的權限,由 root 擁有。謝謝。
/etc/init.d/
內容中的 PHP5-FPM 文件#!/bin/sh ### BEGIN INIT INFO # Provides: php-fpm php5-fpm # Required-Start: $remote_fs $network # Required-Stop: $remote_fs $network # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: starts php5-fpm # Description: Starts The PHP FastCGI Process Manager Daemon ### END INIT INFO # Author: Ondrej Sury <ondrej@debian.org> PATH=/sbin:/usr/sbin:/bin:/usr/bin DESC="PHP5 FastCGI Process Manager" NAME=php5-fpm DAEMON=/usr/sbin/$NAME DAEMON_ARGS="--daemonize --fpm-config /etc/php5/fpm/php-fpm.conf" PIDFILE=/var/run/php5-fpm.pid TIMEOUT=30 SCRIPTNAME=/etc/init.d/$NAME # Exit if the package is not installed [ -x "$DAEMON" ] || exit 0 # Read configuration variable file if it is present [ -r /etc/default/$NAME ] && . /etc/default/$NAME # Load the VERBOSE setting and other rcS variables . /lib/init/vars.sh # Define LSB log_* functions. # Depend on lsb-base (>= 3.0-6) to ensure that this file is present. . /lib/lsb/init-functions # Don't run if we are running upstart if init_is_upstart; then exit 1 fi # # Function to check the correctness of the config file # do_check() { /usr/lib/php5/php5-fpm-checkconf || return 1 return 0 } # # Function that starts the daemon/service # do_start() { # Return # 0 if daemon has been started # 1 if daemon was already running # 2 if daemon could not be started start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \ || return 1 start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \ $DAEMON_ARGS 2>/dev/null \ || return 2 # Add code here, if necessary, that waits for the process to be ready # to handle requests from services started subsequently which depend # on this one. As a last resort, sleep for some time. } # # Function that stops the daemon/service # do_stop() { # Return # 0 if daemon has been stopped # 1 if daemon was already stopped # 2 if daemon could not be stopped # other if a failure occurred start-stop-daemon --stop --quiet --retry=QUIT/$TIMEOUT/TERM/5/KILL/5 --pidfile $PIDFILE --name $NAME RETVAL="$?" [ "$RETVAL" = 2 ] && return 2 # Wait for children to finish too if this is a daemon that forks # and if the daemon is only ever run from this initscript. # If the above conditions are not satisfied then add some other code # that waits for the process to drop all resources that could be # needed by services started subsequently. A last resort is to # sleep for some time. start-stop-daemon --stop --quiet --oknodo --retry=0/30/TERM/5/KILL/5 --exec $DAEMON [ "$?" = 2 ] && return 2 # Many daemons don't delete their pidfiles when they exit. rm -f $PIDFILE return "$RETVAL" } # # Function that sends a SIGHUP to the daemon/service # do_reload() { # # If the daemon can reload its configuration without # restarting (for example, when it is sent a SIGHUP), # then implement that here. # start-stop-daemon --stop --signal USR2 --quiet --pidfile $PIDFILE --name $NAME return 0 } case "$1" in start) [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME" do_check $VERBOSE case "$?" in 0) do_start case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; 1) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; stop) [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" do_stop case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; status) status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $? ;; check) do_check yes ;; reload|force-reload) log_daemon_msg "Reloading $DESC" "$NAME" do_reload log_end_msg $? ;; reopen-logs) log_daemon_msg "Reopening $DESC logs" $NAME if start-stop-daemon --stop --signal USR1 --oknodo --quiet \ --pidfile $PIDFILE --exec $DAEMON then log_end_msg 0 else log_end_msg 1 fi ;; restart) log_daemon_msg "Restarting $DESC" "$NAME" do_stop case "$?" in 0|1) do_start case "$?" in 0) log_end_msg 0 ;; 1) log_end_msg 1 ;; # Old process is still running *) log_end_msg 1 ;; # Failed to start esac ;; *) # Failed to stop log_end_msg 1 ;; esac ;; *) echo "Usage: $SCRIPTNAME {start|stop|status|restart|reload|force-reload}" >&2 exit 1 ;; esac :
我認為這取決於您在配置中的設置方式。
在我的 debian 設置中,我沒有那個目錄,在 var/run 上只有一個 php5-fpm.pid
但是我在 /var/lib/php5-fpm 上有一個套接字,在其他設置中,套接字在 /tmp 但因為我已經將它設置在那裡,並且沒有 var/lib/php5-fpm
因此,我認為您將其配置為在 /var/run/php5-fpm 上創建套接字,但該目錄刪除了 con reboot 並且 php5-fpm 不預設創建它(這是我的情況,php5-fpm 創建套接字但如果目錄沒有存在 php5-fpm 不創建套接字,您需要先創建目錄)
因此,請檢查您的設置並查看創建套接字的位置。
如果我不得不猜測應該手動創建文件夾,這是一個權限問題。確保為該文件夾設置了適當的權限。