日立 CR210 控制台命令

我正在尋找日立 CR210 控制台的命令。

這相當於 HP ILO，您可以在其中使用 ssh 連接到 ILO IP、訪問控制台（如果作業系統處於文本模式）、關閉/打開主機電源、模擬刀片退出等等。

登錄主機給我以下

host:~ # ssh -l user01 8.8.8.8
user01@8.8.8.8's password:
# inactivity_timer[min] : 10
S0051
ALL RIGHTS RESERVED, COPYRIGHT (C), 2011, 2012, HITACHI, LTD.
Chassis ID        : 9 T999999999
Firmware Revision :
$ ?
E0025 : Command is invalid.
S0005 : Command was invalid.
S0000 : Command was finished.

我嘗試用?​​ , h,he替換help，info但無濟於事。

所有資訊都在這裡（附件 B5）

host:~ # ssh -l user01 8.8.8.8
user01@8.8.8.8's password:
# inactivity_timer[min] : 10
S0051
ALL RIGHTS RESERVED, COPYRIGHT (C), 2011, 2012, HITACHI, LTD.
Chassis ID        : 9 T999999999
Firmware Revision :
$ show remote-access protocol http
-- HTTP setting --
Port number      : 80
Allow            : allow
S0002 : Command succeeded.
S0000 : Command was finished.
$ show language system
-- System language --
Language : english
S0002 : Command succeeded.
S0000 : Command was finished.
$ show chassis setting
-- chassis setting --
Chassis ID                     : 9 T999999999
Maintenance classification     : normal
-- chassis FRU setting --
Part/model number              : XX-XXXXXXX-XXX-X
Serial number                  : 12345-XXXXXXX-XXX-000000000
Model ID                       : YY
Midplane ID                    : ZZ
First WWN                      : 0000000000000000
S0002 : Command succeeded.
S0000 : Command was finished.​

等等等等

引用自：https://serverfault.com/questions/753952