Hp-Proliant

無法在 hpacucli (SmartArray P400i) 中將捲標記為可啟動

  • August 19, 2020

我有帶硬體控制器 HP SmartArray P400i的 HP ProLiant G5。我從 4 個 HDD 創建了邏輯驅動器並安裝了作業系統,但我不知道將此卷標記為啟動。這是HP SSA 磁碟中的輸出:hpacucli

=> ctrl slot=0 modify bootcontroller=enable  
=> ctrl slot=0 id 1 modify bootvolume=primary  
Error: logicaldrive 1 cannot be set as the boot volume.  
Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration.  
Reason: Not Appllicable

=> ctrl slot=0 show config  
Smart Array P400i in Slot 0 (Embedded) (sn: xxxxxxxxxx)  
Array A (SATA, Unused Space: 0MB)  
logicaldrive 1 (1.8 TB, RAID 1+0, OK)  
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 1 TB, OK)  
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 1 TB, OK)  
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 1 TB, OK)  
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 1 TB, OK)

此外,邏輯驅動器類型為Data.

這裡有什麼問題?如何將邏輯卷標記為可啟動?

所以我下載了Smart Update Firmware DVD並更新了它所建議的所有內容。現在我看到了那個Select Boot Volume按鈕!

似乎應該可以通過 BIOS Option ROM Configuration for Arrays (ORCA) 來實現。

h20565.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=3454575&docLocale=en_US&docId=emr_na-c04135224

在此處輸入圖像描述

引用自:https://serverfault.com/questions/873300