Cisco ASA 5506-X - 內部到外部流量

我無法在我的一個內部埠上獲得流量以路由到外部。我相信我有正確的 NAT、路由和對象配置。目標是從外部在內部介面上訪問 Web 流量。我可以從外部介面 ping 外部地址，但不能從任何內部介面執行此操作。以下是配置文件以獲取更多資訊。

ASA Version 9.7(1)4 
!
hostname *****
enable password ***** pbkdf2
names

!
interface GigabitEthernet1/1
nameif outside
security-level 0
ip address 23.120.179.137 255.255.255.248 
!
interface GigabitEthernet1/2
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0 
!
interface GigabitEthernet1/3
shutdown
no nameif    
no security-level
no ip address
!
interface GigabitEthernet1/4
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/5
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/6
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet1/7
shutdown
no nameif    
no security-level
no ip address
!
interface GigabitEthernet1/8
shutdown
no nameif
no security-level
no ip address
!
interface Management1/1
management-only
no nameif
no security-level
no ip address
!
ftp mode passive
object network obj_any
subnet 0.0.0.0 0.0.0.0
pager lines 24
logging asdm informational
mtu outside 1500
mtu inside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
arp rate-limit 16384
!
object network obj_any
nat (any,outside) dynamic interface
!
nat (inside,outside) after-auto source dynamic any interface
route outside 0.0.0.0 0.0.0.0 23.120.179.142 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 sctp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
timeout conn-holddown 0:00:15
timeout igp stale-route 0:01:10
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
service sw-reset-button
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
no ssh stricthostkeycheck
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0

dhcpd auto_config outside
!
dhcpd address 192.168.1.5-192.168.1.254 inside
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
dynamic-access-policy-record DfltAccessPolicy
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters   
 message-length maximum client auto
 message-length maximum 512
 no tcp-inspection
policy-map global_policy
class inspection_default
 inspect dns preset_dns_map 
 inspect ftp 
 inspect h323 h225 
 inspect h323 ras 
 inspect rsh 
 inspect rtsp 
 inspect esmtp 
 inspect sqlnet 
 inspect skinny  
 inspect sunrpc 
 inspect xdmcp 
 inspect sip  
 inspect netbios 
 inspect tftp 
 inspect ip-options 
!
service-policy global_policy global
prompt hostname context 
no call-home reporting anonymous
Cryptochecksum:******
: end

您可能只需要為 icmp 添加檢查。

策略映射 global_policy
類檢查預設
檢查 icmp

檢查 icmp 錯誤

引用自：https://serverfault.com/questions/872760