Apache-2.2

Mountain Lion 上的 Apache 2.2 忽略 ProxyPass 並向 DocumentRoot 發送請求

  • October 27, 2012

我有病鬍子在 127.0.0.1:8081/sickbeard 執行

ProxyRequests Off

ProxyPass /sickbeard http://127.0.0.1:8081/sickbeard
ProxyPassReverse /sickbeard http://127.0.0.1:8081/sickbeard

在 httpd.conf

然而,當我嘗試訪問http://example.com/sickbeard/時,它給了我一個 404,並在錯誤日誌中顯示。

File does not exist: /Library/Server/Web/Data/Sites/Default/sickbeard

我認為這意味著它忽略了 ProxyPass 和 ProxyPassReverse 指令?

有誰知道這可能是為什麼?對於它的價值,這個設置曾經在 Lion 下工作。

我載入了以下模組:

LoadModule proxy_module libexec/apache2/mod_proxy.so
LoadModule proxy_connect_module libexec/apache2/mod_proxy_connect.so
LoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.so
LoadModule proxy_http_module libexec/apache2/mod_proxy_http.so
LoadModule proxy_scgi_module libexec/apache2/mod_proxy_scgi.so
LoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.so
LoadModule proxy_balancer_module libexec/apache2/mod_proxy_balancer.so

謝謝你的時間!

編輯:我被要求提供整個 conf 文件。

我相信它本質上是預設的山獅 apache httpd.conf。

EDIT2:如果在閱讀 httpd.conf 後不清楚,couchpotato 反向代理也不起作用。

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "log/foo_log"
# with ServerRoot set to "/usr" will be interpreted by the
# server as "/usr/log/foo_log".

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "/usr"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule authn_file_module libexec/apache2/mod_authn_file.so
LoadModule authn_dbm_module libexec/apache2/mod_authn_dbm.so
LoadModule authn_anon_module libexec/apache2/mod_authn_anon.so
LoadModule authn_dbd_module libexec/apache2/mod_authn_dbd.so
LoadModule authn_default_module libexec/apache2/mod_authn_default.so
LoadModule authz_host_module libexec/apache2/mod_authz_host.so
LoadModule authz_groupfile_module libexec/apache2/mod_authz_groupfile.so
LoadModule authz_user_module libexec/apache2/mod_authz_user.so
LoadModule authz_dbm_module libexec/apache2/mod_authz_dbm.so
LoadModule authz_owner_module libexec/apache2/mod_authz_owner.so
LoadModule authz_default_module libexec/apache2/mod_authz_default.so
LoadModule auth_basic_module libexec/apache2/mod_auth_basic.so
LoadModule auth_digest_module libexec/apache2/mod_auth_digest.so
LoadModule cache_module libexec/apache2/mod_cache.so
LoadModule disk_cache_module libexec/apache2/mod_disk_cache.so
LoadModule mem_cache_module libexec/apache2/mod_mem_cache.so
LoadModule dbd_module libexec/apache2/mod_dbd.so
LoadModule dumpio_module libexec/apache2/mod_dumpio.so
LoadModule reqtimeout_module libexec/apache2/mod_reqtimeout.so
LoadModule ext_filter_module libexec/apache2/mod_ext_filter.so
LoadModule include_module libexec/apache2/mod_include.so
LoadModule filter_module libexec/apache2/mod_filter.so
LoadModule substitute_module libexec/apache2/mod_substitute.so
LoadModule deflate_module libexec/apache2/mod_deflate.so
LoadModule log_config_module libexec/apache2/mod_log_config.so
LoadModule log_forensic_module libexec/apache2/mod_log_forensic.so
LoadModule logio_module libexec/apache2/mod_logio.so
LoadModule env_module libexec/apache2/mod_env.so
LoadModule mime_magic_module libexec/apache2/mod_mime_magic.so
LoadModule cern_meta_module libexec/apache2/mod_cern_meta.so
LoadModule expires_module libexec/apache2/mod_expires.so
LoadModule headers_module libexec/apache2/mod_headers.so
LoadModule ident_module libexec/apache2/mod_ident.so
LoadModule usertrack_module libexec/apache2/mod_usertrack.so
#LoadModule unique_id_module libexec/apache2/mod_unique_id.so
LoadModule setenvif_module libexec/apache2/mod_setenvif.so
LoadModule version_module libexec/apache2/mod_version.so
LoadModule proxy_module libexec/apache2/mod_proxy.so
LoadModule proxy_connect_module libexec/apache2/mod_proxy_connect.so
LoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.so
LoadModule proxy_http_module libexec/apache2/mod_proxy_http.so
LoadModule proxy_scgi_module libexec/apache2/mod_proxy_scgi.so
LoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.so
LoadModule proxy_balancer_module libexec/apache2/mod_proxy_balancer.so
LoadModule ssl_module libexec/apache2/mod_ssl.so
LoadModule mime_module libexec/apache2/mod_mime.so
LoadModule dav_module libexec/apache2/mod_dav.so
LoadModule status_module libexec/apache2/mod_status.so
LoadModule autoindex_module libexec/apache2/mod_autoindex.so
LoadModule asis_module libexec/apache2/mod_asis.so
LoadModule info_module libexec/apache2/mod_info.so
LoadModule cgi_module libexec/apache2/mod_cgi.so
LoadModule dav_fs_module libexec/apache2/mod_dav_fs.so
LoadModule vhost_alias_module libexec/apache2/mod_vhost_alias.so
LoadModule negotiation_module libexec/apache2/mod_negotiation.so
LoadModule dir_module libexec/apache2/mod_dir.so
LoadModule imagemap_module libexec/apache2/mod_imagemap.so
LoadModule actions_module libexec/apache2/mod_actions.so
LoadModule speling_module libexec/apache2/mod_speling.so
LoadModule userdir_module libexec/apache2/mod_userdir.so
LoadModule alias_module libexec/apache2/mod_alias.so
LoadModule rewrite_module libexec/apache2/mod_rewrite.so
#LoadModule perl_module libexec/apache2/mod_perl.so
#LoadModule php5_module libexec/apache2/libphp5.so
#LoadModule hfs_apple_module libexec/apache2/mod_hfs_apple.so

<IfModule !mpm_netware_module>
   <IfModule !mpm_winnt_module>
       #
       # If you wish httpd to run as a different user or group, you must run
       # httpd as root initially and it will switch.  
       #
       # User/Group: The name (or #number) of the user/group to run httpd as.
       # It is usually good practice to create a dedicated user and group for
       # running httpd, as with most system services.
       #
       User _www
       Group _www

   </IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin you@example.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/Library/WebServer/Documents"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
   Options FollowSymLinks
   AllowOverride None
   Order deny,allow
   Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/Library/WebServer/Documents">
   #
   # Possible values for the Options directive are "None", "All",
   # or any combination of:
   #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
   #
   # Note that "MultiViews" must be named *explicitly* --- "Options All"
   # doesn't give it to you.
   #
   # The Options directive is both complicated and important.  Please see
   # http://httpd.apache.org/docs/2.2/mod/core.html#options
   # for more information.
   #
   Options Indexes FollowSymLinks MultiViews

   #
   # AllowOverride controls what directives may be placed in .htaccess files.
   # It can be "All", "None", or any combination of the keywords:
   #   Options FileInfo AuthConfig Limit
   #
   AllowOverride None

   #
   # Controls who can get stuff from this server.
   #
   Order allow,deny
   Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
   DirectoryIndex index.html
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<FilesMatch "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
   Order allow,deny
   Deny from all
   Satisfy All
</FilesMatch>

#
# Apple specific filesystem protection.
#
<Files "rsrc">
   Order allow,deny
   Deny from all
   Satisfy All
</Files>
<DirectoryMatch ".*\.\.namedfork">
   Order allow,deny
   Deny from all
   Satisfy All
</DirectoryMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "/private/var/log/apache2/error_log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
   #
   # The following directives define some format nicknames for use with
   # a CustomLog directive (see below).
   #
   LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
   LogFormat "%h %l %u %t \"%r\" %>s %b" common

   <IfModule logio_module>
     # You need to enable mod_logio.c to use %I and %O
     LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
   </IfModule>

   #
   # The location and format of the access logfile (Common Logfile Format).
   # If you do not define any access logfiles within a <VirtualHost>
   # container, they will be logged here.  Contrariwise, if you *do*
   # define per-<VirtualHost> access logfiles, transactions will be
   # logged therein and *not* in this file.
   #
   CustomLog "/private/var/log/apache2/access_log" common

   #
   # If you prefer a logfile with access, agent, and referer information
   # (Combined Logfile Format) you can use the following directive.
   #
   #CustomLog "/private/var/log/apache2/access_log" combined
</IfModule>

<IfModule alias_module>
   #
   # Redirect: Allows you to tell clients about documents that used to 
   # exist in your server's namespace, but do not anymore. The client 
   # will make a new request for the document at its new location.
   # Example:
   # Redirect permanent /foo http://www.example.com/bar

   #
   # Alias: Maps web paths into filesystem paths and is used to
   # access content that does not live under the DocumentRoot.
   # Example:
   # Alias /webpath /full/filesystem/path
   #
   # If you include a trailing / on /webpath then the server will
   # require it to be present in the URL.  You will also likely
   # need to provide a <Directory> section to allow access to
   # the filesystem path.

   #
   # ScriptAlias: This controls which directories contain server scripts. 
   # ScriptAliases are essentially the same as Aliases, except that
   # documents in the target directory are treated as applications and
   # run by the server when requested rather than as documents sent to the
   # client.  The same rules about trailing "/" apply to ScriptAlias
   # directives as to Alias.
   #
   ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/WebServer/CGI-Executables/$1"

</IfModule>

<IfModule cgid_module>
   #
   # ScriptSock: On threaded servers, designate the path to the UNIX
   # socket used to communicate with the CGI daemon of mod_cgid.
   #
   #Scriptsock /private/var/run/cgisock
</IfModule>

#
# "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/Library/WebServer/CGI-Executables">
   AllowOverride None
   Options None
   Order allow,deny
   Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
   #
   # TypesConfig points to the file containing the list of mappings from
   # filename extension to MIME-type.
   #
   TypesConfig /private/etc/apache2/mime.types

   #
   # AddType allows you to add to or override the MIME configuration
   # file specified in TypesConfig for specific file types.
   #
   #AddType application/x-gzip .tgz
   #
   # AddEncoding allows you to have certain browsers uncompress
   # information on the fly. Note: Not all browsers support this.
   #
   #AddEncoding x-compress .Z
   #AddEncoding x-gzip .gz .tgz
   #
   # If the AddEncoding directives above are commented-out, then you
   # probably should define those extensions to indicate media types:
   #
   AddType application/x-compress .Z
   AddType application/x-gzip .gz .tgz

   #
   # AddHandler allows you to map certain file extensions to "handlers":
   # actions unrelated to filetype. These can be either built into the server
   # or added with the Action directive (see below)
   #
   # To use CGI scripts outside of ScriptAliased directories:
   # (You will also need to add "ExecCGI" to the "Options" directive.)
   #
   #AddHandler cgi-script .cgi

   # For type maps (negotiated resources):
   #AddHandler type-map var

   #
   # Filters allow you to process content before it is sent to the client.
   #
   # To parse .shtml files for server-side includes (SSI):
   # (You will also need to add "Includes" to the "Options" directive.)
   #
   #AddType text/html .shtml
   #AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile /private/etc/apache2/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# 6894961
TraceEnable off

# Supplemental configuration
#
# The configuration files in the /private/etc/apache2/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
Include /private/etc/apache2/extra/httpd-mpm.conf

# Multi-language error messages
#Include /private/etc/apache2/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
Include /private/etc/apache2/extra/httpd-autoindex.conf

# Language settings
Include /private/etc/apache2/extra/httpd-languages.conf

# User home directories
Include /private/etc/apache2/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include /private/etc/apache2/extra/httpd-info.conf

# Virtual hosts
#Include /private/etc/apache2/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
Include /private/etc/apache2/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include /private/etc/apache2/extra/httpd-dav.conf

# Various default settings
#Include /private/etc/apache2/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include /private/etc/apache2/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
   SSLRandomSeed startup builtin
   SSLRandomSeed connect builtin
</IfModule>

Include /private/etc/apache2/other/*.conf


# Configure reverse proxy requests for CouchPotato and Sickbeard

ProxyRequests Off

ProxyPass /sickbeard http://127.0.0.1:8081/sickbeard

ProxyPassReverse /sickbeard http://127.0.0.1:8081/sickbeard

ProxyPass /couchpotato http://127.0.0.1:5050/couchpotato

ProxyPassReverse /couchpotato http://127.0.0.1:5050/couchpotato

EDIT3: 中有一個文件/private/etc/apache2/other/php5.conf

<IfModule php5_module>
   AddType application/x-httpd-php .php
   AddType application/x-httpd-php-source .phps

   <IfModule dir_module>
       DirectoryIndex index.html index.php
   </IfModule>
</IfModule>

EDIT4:我有一個瘋狂的想法,也許它正在閱讀不同的httpd.conf,(un?)幸運的是它不是heh。對於它的價值,這是輸出sudo apachectl -V

Server version: Apache/2.2.22 (Unix)
Server built:   Aug 24 2012 17:16:58
Server's Module Magic Number: 20051115:30
Server loaded:  APR 1.4.5, APR-Util 1.3.12
Compiled using: APR 1.4.5, APR-Util 1.3.12
Architecture:   64-bit
Server MPM:     Prefork
 threaded:     no
   forked:     yes (variable process count)
Server compiled with....
-D APACHE_MPM_DIR="server/mpm/prefork"
-D APR_HAS_SENDFILE
-D APR_HAS_MMAP
-D APR_HAVE_IPV6 (IPv4-mapped addresses enabled)
-D APR_USE_FLOCK_SERIALIZE
-D APR_USE_PTHREAD_SERIALIZE
-D SINGLE_LISTEN_UNSERIALIZED_ACCEPT
-D APR_HAS_OTHER_CHILD
-D AP_HAVE_RELIABLE_PIPED_LOGS
-D DYNAMIC_MODULE_LIMIT=128
-D HTTPD_ROOT="/usr"
-D SUEXEC_BIN="/usr/bin/suexec"
-D DEFAULT_PIDLOG="/private/var/run/httpd.pid"
-D DEFAULT_SCOREBOARD="logs/apache_runtime_status"
-D DEFAULT_LOCKFILE="/private/var/run/accept.lock"
-D DEFAULT_ERRORLOG="logs/error_log"
-D AP_TYPES_CONFIG_FILE="/private/etc/apache2/mime.types"
-D SERVER_CONFIG_FILE="/private/etc/apache2/httpd.conf"

EDIT5:實際上,是的,它是從不同的文件中讀取的,特別是:/Library/Server/Web/Config/apache2/httpd_server_app.conf由 server.app 指定。請在此處查看答案以獲取更多資訊。

Mountain Lions apache 配置位於 /Library/Server/Web/Config/apache2 下

不要編輯 /etc 或 /private/etc 下的文件並期望這些更改會產生任何影響。

請注意,ProxyPass 和 ProxyPassReverse 是配置條目,可能會被使用 Apple 自己的 GUI 實用程序(如伺服器應用程序)覆蓋,如站點配置文件中所述!閱讀“man webapp.plist”!

編輯:我已經坐下來為你做了一個例子。有一件事要提一下:下面的 plist 文件中的路徑設置為 /sabnzbd,但在瀏覽器中您應該輸入 http(s)://yourhost/sabnzbd/ - 這是帶有斜杠的。此範例還假設 webapp 正在同一主機上的特殊埠(localhost:8080)上執行。

下面的文本保存為/Library/Server/Web/Config/apache2/webapps/org.sabnzbd.plist。保存後,您將能夠通過在終端視窗中發出“sudo webappctl start org.sabnzbd”來啟動此 Web 應用程序。啟動網路應用程序後,您將在 /Library/Server/Web/Config/apache2/sites/0000_any_*.conf 中找到 ProxyPass 和 ProxyPassReverse 條目

<?xml version="1.0" encoding="UTF-7"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
   <key>name</key>
           <string>org.sabnzbd</string>
   <key>displayName</key>
           <string>SABnzbd app at /sabnzbd</string>
   <key>launchKeys</key>
           <array/>
   <key>installationIndicatorFilePath</key>
           <string>/Applications/SABnzbd.app/Contents/Resources/SABnzbd.py</string>
   <key>includeFiles</key>
           <array/>
   <key>proxies</key>      <!-- ProxyPass/ProxyPassReverse directives are activated when webapp is started -->
           <dict>
                   <key>/sabnzbd</key>            <!-- Sets up a reverse proxy -->
                   <dict>
                   <key>keysAndValues</key>
                           <string></string>
                   <key>path</key>
                           <string>/sabnzbd</string>
                   <key>urls</key>         <!-- URLs comprise a proxy_balancer group -->
                           <array>
                                   <string>http://localhost:8080</string>
                           </array>
                   </dict>
           </dict>
   <key>requiredModuleNames</key>
           <array/>
</dict>
</plist>

引用自:https://serverfault.com/questions/441722