Adaptec
關於 Adaptec Raid-Controller 上的寫入記憶體設置和寫入記憶體狀態的混淆
由於性能問題,我想驗證是否確實為 Adaptec ASR71605 Raid-Controller 啟用了寫入記憶體。
write-cache setting=enabled
我可以看到和之間的不匹配write-cache status=off
,我想知道記憶體是否真的啟用了。當顯式啟用記憶體時
arcconf setcache 1 LOGICALDRIVE 1 wb
,狀態不會改變。請參閱下面的 arcconf 輸出:
root@stor ~ $ arcconf getconfig 1 ld Controllers found: 1 ---------------------------------------------------------------------- Logical device information ---------------------------------------------------------------------- Logical device number 0 Logical device name : SYSTEM RAID level : 6 Reed-Solomon Status of logical device : Optimal Size : 51188 MB Stripe-unit size : 256 KB Read-cache setting : Enabled Read-cache status : On Write-cache setting : Enabled Write-cache status : Off Partitioned : Yes Protected by Hot-Spare : No Bootable : Yes Failed stripes : No Power settings : Disabled -------------------------------------------------------- Logical device segment information -------------------------------------------------------- Segment 0 : Present (Controller:1,Enclosure:0,Slot:4) WD-WXH... Segment 1 : Present (Controller:1,Enclosure:0,Slot:5) WD-WX1... Segment 2 : Present (Controller:1,Enclosure:0,Slot:6) WD-WXH... Segment 3 : Present (Controller:1,Enclosure:0,Slot:7) WD-WXH... Segment 4 : Present (Controller:1,Enclosure:0,Slot:12) WD-WX... Segment 5 : Present (Controller:1,Enclosure:0,Slot:13) WD-WX... Segment 6 : Present (Controller:1,Enclosure:0,Slot:14) WD-WX... Segment 7 : Present (Controller:1,Enclosure:0,Slot:15) WD-WX... Logical device number 1 Logical device name : RAPTOR RAID level : 6 Reed-Solomon Status of logical device : Optimal Size : 5668850 MB Stripe-unit size : 256 KB Read-cache setting : Enabled Read-cache status : On Write-cache setting : Enabled Write-cache status : Off Partitioned : No Protected by Hot-Spare : No Bootable : No Failed stripes : No Power settings : Disabled -------------------------------------------------------- Logical device segment information -------------------------------------------------------- Segment 0 : Present (Controller:1,Enclosure:0,Slot:4) WD-WXH... Segment 1 : Present (Controller:1,Enclosure:0,Slot:5) WD-WX1... Segment 2 : Present (Controller:1,Enclosure:0,Slot:6) WD-WXH... Segment 3 : Present (Controller:1,Enclosure:0,Slot:7) WD-WXH... Segment 4 : Present (Controller:1,Enclosure:0,Slot:12) WD-WX... Segment 5 : Present (Controller:1,Enclosure:0,Slot:13) WD-WX... Segment 6 : Present (Controller:1,Enclosure:0,Slot:14) WD-WX... Segment 7 : Present (Controller:1,Enclosure:0,Slot:15) WD-WX...
根據 Adaptec 的支持,寫入記憶體在韌體更新和下一次重新啟動之間的時間內不起作用。
實際上,已經進行了韌體更新而無需重新啟動,
arcconf getversion
如果該命令列出了一個Staged Version
數字,則可以看到這一點。